Genie Z-33/18 Operator's Manual

Also see for Z-33/18: Maintenance manual Maintenance manual Maintenance manual

Contents

Genie Z-33/18 Operator's Manual Manual pdf 44 page image

42 Z-33/18 Part No. 1257143First edition • First PrintingOperator's ManualMaintenanceObserve and Obey:Only routine maintenance items specified inthis manual shall be performed by the operator.Scheduled maintenance inspections shall becompleted by qualified service technicians,according to the manufacturer’s specificationsand the requirements specified in theresponsibilities manual.Dispose of material in accordance withgovernmental regulations.Use only Genie approved replacement parts.Maintenance Symbols LegendThe following symbols have been used in this manualto help communicate the intent of the instructions.When one or more of the symbols appear at thebeginning of a maintenance procedure, it conveysthe meaning below.Indicates that tools will be required toperform this procedure.Indicates that new parts will be required toperform this procedure.Check the Hydraulic Oil LevelMaintaining the hydraulic oil at the proper level isessential to machine operation. Improper hydraulicoil levels can damage hydraulic components. Dailychecks allow the inspector to identify changesin oil level that might indicate the presence ofhydraulic system problems.1 Be sure that the boom is in the stowed position.2 Visually inspect the sight gauge located on theside of the hydraulic oil tank.Result: The hydraulic oil level should be at thefull black mark of the sight gauge.3 Add oil as needed. Do not overfill.Hydraulic oil specificationsHydraulic oil type Shell Tellus S2 V46 equivalent