Genie Z-45/25 Operator's Manual

Also see for Z-45/25: Service manual Maintenance manual Operator's manual Operator's manual Service manual

Contents

Genie Z-45/25 Operator's Manual Manual pdf 27 page image

Part No. 82595 Genie Z-45/25 DC & Genie Z-45/25J DC 25Operator's ManualSecond Edition · First PrintingObserve and Obey:The transport vehicle must be parked on a levelsurface.The transport vehicle must be secured toprevent rolling while the machine is beingloaded.Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. See the serial plate for themachine weight.The machine must be on a level surface orsecured before releasing the brakes.Be sure the turntable is secured with theturntable rotation lock before transporting. Besure to unlock the turntable for operation.Free-wheel Configuration forWinching1 Chock the wheels to prevent the machine fromrolling.2 Release the non-steer wheel brakes by turningover the drive hub disconnect caps.3 Be sure the winch line is properly secured to thedrive chassis tie points and the path is clear ofall obstructions.After the machine is loaded:1 Chock the wheels to prevent the machine fromrolling.2 Apply the non-steer wheel brakes by turningover the drive hub disconnect caps.Towing a Genie Z-45/25 DC or a Z-45/25J DCmachine is not recommended. If the machine mustbe towed, do not exceed 2 mph / 3.2 km/h.Transport and Lifting InstructionsDisengagePositionEngagePosition