Service and Repair Manual September 2016Repair Procedures12 Z®-45/25 Bi-Energy • Z®-45/25J Bi-Energy Part No. 1268546GTSection 3 Repair Pr oc eduresObserve and Obey: Repair procedures shall be completed by aperson trained and qualified on the repair ofthis machine. Immediately tag and remove from service adamaged or malfunctioning machine. Repair any machine damage or malfunctionbefore operating the machine.Before Repairs Start: Read, understand and obey the safety rulesand operating instructions in the appropriateoperator's manual on your machine. Be sure that all necessary tools and parts areavailable and ready for use. Use only Genie approved replacement parts. Read each procedure completely and adhereto the instructions. Attempting shortcuts mayproduce hazardous conditions.Machine Configuration: Unless otherwise specified, perform eachrepair procedure with the machine in thefollowing configuration:• Machine parked on a firm, level surface• Key switch in the off position with the keyremoved• The red Emergency Stop button in the offposition at both the ground and platformcontrols• Wheels chocked• All external AC power supply disconnectedfrom the machine• Boom in the stowed position• Turntable secured with the turntable rotationlock
