Genie Z-51/30J Operators Manual With Maintenance Information

Also see for Z-51/30J: Maintenance manual Maintenance manual Maintenance manual Operator's manual Operator's manual

Contents

Genie Z-51/30J Operators Manual With Maintenance Information Manual pdf 34 page image

Operator's Manual First Edition • Second Printing32 Z-51/30J Part No. 97900Free-wheel Configuration forWinchingChock the wheels to prevent the machine fromrolling.Release the non-steer wheel brakes by turning overthe drive hub disconnect caps (see below).Be sure the winch line is properly secured to thedrive chassis tie points and the path is clear of allobstructions.Reverse the procedures described to re-engage thebrakes.Note: Towing the Genie Z-51/30J is notrecommended. If the machine must be towed, donot exceed 3.2 km/h.Transport and Lifting InstructionsObserve and Obey:Genie Industries provides this securementinformation as a recommendation. Drivers aresolely responsible for making sure machinesare properly secured and the correct trailer isselected pursuant to US Department ofTransportation regulations, other localizedregulations, and their company policy.Genie customers needing to containerize any liftor Genie product should source a qualifiedfreight forwarder with expertise in preparing,loading and securing construction and liftingequipment for international shipment.Only qualified aerial lift operators should movethe machine on or off the truck.The transport vehicle must be parked on a levelsurface.The transport vehicle must be secured toprevent rolling while the machine is beingloaded.Be sure the vehicle capacity, loading surfacesand chains or straps are sufficient to withstandthe machine weight. Genie lifts are very heavyrelative to their size. See the serial plate for themachine weight. See the Decals section for theserial plate location.Be sure the turntable is secured with theturntable rotation lock before transporting. Besure to unlock the turntable for operation.DisengagePositionEngagePositionDo not drive the machine on a slope thatexceeds the uphill, downhill or side slope rating.See Driving on a Slope in the OperatingInstructions section.If the slope of the transport vehicle bed exceedsthe uphill or downhill maximum slope rating, themachine must be loaded and unloaded using awinch as described. See the Specificationssection for the slope ratings.