Genie Z-51/30J Operators Manual With Maintenance Information

Also see for Z-51/30J: Maintenance manual Maintenance manual Maintenance manual Operator's manual Operator's manual

Contents

Genie Z-51/30J Operators Manual With Maintenance Information Manual pdf 37 page image

Operator's ManualFirst Edition • Second PrintingPart No. 97900 Z-51/30J 35SpecificationsZ-51/30JHeight, working maximum 17.6 mHeight, platform maximum 15.6 mHeight, stowed maximum 2.16 mHorizontal reach maximum 9.25 mWidth 2.29 mLength, stowed 7.5 mMaximum load capacity 227 kgMaximum wind speed 12.5 m/sWheelbase 2.03 mTurning radius (outside) 4.50 mTurning radius (inside) 1.68 mTurntable rotation (degrees) 355°Turntable tailswing 0 cmDrive speed, stowed 8 km/h12.2 m/5.5 secDrive speed, 1 km/hbooms raised 12.2 m/45 secAirborne noise emissions 73 dBMaximum sound level at normal operating workstations(A-weighted)Ground clearance, center 39.4 cmGround clearance, minimum 29.2 cmControls 12V DC proportionalWeight See Serial Plate(Machine weights vary with option configurations)Platform dimensions, 6 foot 1.8 m x 76 cm(length x width)Platform leveling self-levelingPlatform rotation 160 degreesAC outlet in platform standardHydraulic pressure, maximum 221 bar(boom functions)System voltage 12VTire size, 4WD 355/55 D625, foam-filledMaximum slope rating, stowed positionCounterweight uphill 45% / 24°Counterweight downhill 25% / 14°Side slope 25% / 14°Note: Slope rating is subject to ground conditions andadequate traction.Fuel tank capacity 64.3 litersFloor Loading InformationTire load, maximum 4218 kgTire contact pressure 4.45 kg/cm 2436 kPaOccupied floor pressure 11.06 kPa1130 kg/m2Note: Floor loading information is approximate anddoes not incorporate different option configurations. Itshould be used only with adequate safety factors.Continuous improvement of our products is a Geniepolicy. Product specifications are subject to changewithout notice or obligation.

/ 39

Related manuals for Genie Z-51/30J