Genie Z-62 Operator's Manual

Contents

Genie Z-62 Operator's Manual Manual pdf 44 page image

Operator's Manual First Edition • First PrintingOperating Instructions42 Z-62/40 Part No. 1257653Emergency StopPush in the red Emergency Stop button to the offposition at the ground controls or the platformcontrols to stop all machine functions and turn theengine off.Repair any function that operates when either redEmergency Stop button is pushed in.Selecting and operating the ground controls willoverride the platform red Emergency Stop button.Emergency PowerUse emergency power if the primary power source(engine) fails.1 Turn the key switch to ground or platformcontrol.2 Pull out the red Emergency Stop button to theon position.3 Press down the foot switch when using thecontrols from the platform.4 Break the security tie and lift the emergencypower switch cover.Note: If the security tie is broken or missing,consult the appropriate Genie Service Manual.5 Simultaneously hold theemergency power switch on andactivate the desired function.The drive function will not operate with emergencypower.Operation from Ground1 Turn the key switch to ground control.2 Pull out the red Emergency Stop button to theon position.3 Gasoline/LPG models: Choose fuel by movingthe fuel select switch to the desired position.4 Start the engine.To Position Platform1 Press and hold a function enablebutton.2 Move the appropriate toggle switch accordingto the markings on the control panel.Drive and steer functions are not available from theground controls.