Genie Z-62 Operator's Manual
                                                               | |
First Edition • First Printing Operator's ManualSpecificationsPart No. 1257653 Z-62/40 59SpecificationsModel Z-62/40Height, working maximum 20.7 mHeight, platform maximum 18.87 mHeight, stowed maximum 2.9 mHorizontal reach, maximum 12.42 mWidth 2.49 mLength, stowed 7.57 mMaximum load capacity 227 kgMaximum wind speed 12.5 m/sWheelbase 2.49 mGround clearance, center 41 cmGround clearance, axle 33 cmTurning radius (outside) 5.7 mTurning radius (inside) 2.8 mTurntable rotation (degrees) 360° ContinuousTurntable tailswing 0Platform dimensions, 1.8 m(length x width)182 x 76 cmPlatform dimensions, 2.4 m(length x width)244 x 91 cmPlatform leveling self-levelingPlatform rotation 180°Controls 12V DC proportionalAC outlet in platform standardHydraulic pressure, maximum(boom functions)206.8 barSystem voltage 12VTire size 355/55 D625, 14 plyTire size, High Floatation 41/18LL x 22.5, 14 plyWeight 9,934 kg(Machine weights vary with option configurations. Seeserial label for specific machine weight.)Fuel tank capacity, diesel 132.5 litersFuel tank capacity, gasoline 75.7 litersMaximum slope rating, stowed position, 2WDCounterweight uphill 30% 17°Counterweight downhill 10% 6°Side slope 25% 14°Maximum slope rating, stowed position, 4WDCounterweight uphill 45% 24°Counterweight downhill 30% 17°Side slope 25% 14°Note: Slope rating is subject to ground conditions andadequate traction.Drive speedsDrive speed, stowed, 2WD 4.8 km/h12.2 m/9.1 secDrive speed, stowed, 4WD 5.1 km/h12.2 m/8.5 secDrive speed, raised or extended 1.0 km/h12.2 m/40secAirborne noise emissionsSound pressure level at groundworkstation<84 dBASound pressure level at platformworkstation<75 dBAGuaranteed sound power level 105 dBATotal vibration value to which the hand/arm system issubjected does not exceed 2.5 m/s 2 .Highest root mean square value of weightedacceleration to which the whole body is subjected doesnot exceed 0.5 m/s2 .Floor loading informationTire load maximum 5,443 kgTire contact pressure 4.9 kg / cm2893 kPaOccupied floor pressure 1,165 kg / m211.4 kPaNote: Floor loading information is approximate and doesnot incorporate different option configurations. It shouldbe used only with adequate safety factors.Continuous improvement of our products is a Geniepolicy. Product specifications are subject to changewithout notice or obligation. |
Related manuals for Genie Z-40
manualsdatabase
Your AI-powered manual search engine