Genie Z-80 Operator's Manual

Contents

18 Genie Z-80/60 Part No. 82258Operator's Manual First Edition · Fifth PrintingFUNCTION TESTSTest the Steering (models with 4 wheel steer)37 Push the steermode selectbutton for square-end (blue arrow)steer.38 Press down the foot switch.39 Slowly move the drive/steer control handle in thedirection indicated by the blue triangle on thecontrol panel OR press the thumb rocker switch inthe direction indicated by the blue triangle.Result: The square-end wheels should turn inthe direction that the blue triangles point on thedrive chassis.40 Push the steermode selectbutton for circle-end (yellow arrow)steer.41 Press down the foot switch.42 Slowly move the drive/steer control handle in thedirection indicated by the yellow triangle on thecontrol panel OR press the thumb rocker switch inthe direction indicated by the yellow triangle.Result: The circle-end wheels should turn in thedirection that the yellow triangles point on thedrive chassis.43 Push the steermode selectbutton for crabsteer.44 Press down the foot switch.45 Slowly move the drive/steer control handle in thedirection indicated by the blue triangle on thecontrol panel OR press the thumb rocker switch inthe direction indicated by the blue triangle..Result: All wheels should turn in the directionthat the blue triangles point on the drivechassis.46 Push the steermode selectbutton forcoordinated steer.47 Press down the foot switch.48 Slowly move the drive/steer control handle in thedirection indicated by the blue triangle on thecontrol panel OR press the thumb rocker switchin the direction indicated by the blue triangle.Result: The square-end wheels should turn inthe direction that the blue triangles point on thedrive chassis. The circle-end wheels should turnin the direction that the yellow triangles point onthe drive chassis.Test the Steering (models with 2 wheel steer)49 Press down the foot switch.50 Press the thumb rocker switch on top of thedrive control handle in the direction indicated bythe blue triangle on the control panel OR slowlymove the drive/steer control handle in thedirection indicated by the blue triangle.Result: The steer wheels should turn in thedirection that the blue triangles point on thedrive chassis.51 Press the thumb rocker switch in the directionindicated by the yellow triangle on the controlpanel OR slowly move the drive/steer handle inthe direction indicated by the yellow triangle.Result: The steer wheels should turn in thedirection that the yellow triangles point on thedrive chassis.