Genie Z-80 Operator's Manual

Contents

Part No. 82258 Genie Z-80/60 23Operator's ManualFirst Edition · Fifth PrintingOPERATING INSTRUCTIONSOperation from Platform1 Turn the key switch to platform control.2 Pull out both ground and platform redEmergency Stop buttons to the on position.3 Gasoline/LPG models: Choose fuel by pressingthe fuel select button.4 Start the engine. Do not press down the footswitch when starting the engine.To Position Platform1 Press down the foot switch.2 Slowly move the appropriate function controlhandle or toggle switch or press the appropriatebutton according to the markings on the controlpanel.To Steer1 Press down the foot switch.Models with 4 wheel steer:2 Select the steer mode by pressing a steer modebutton. The indicator light next to the currentsteer mode will be on.All models:3 Slowly move the drive/steercontrol handle in the directionindicated by the blue or yellowtriangles OR press the thumb rocker switchlocated on top of the drive control handle.Use the color-coded direction arrows on theplatform controls and the drive chassis to identifythe direction the wheels will turn.Auxiliary ControlsUse auxiliary power if the primary power source(engine) fails.1 Turn the key switch to ground or platformcontrol.2 Pull out the red Emergency Stop button to theon position.3 Press down the foot switch when operating theauxiliary controls from the platform.4 Simultaneously hold the auxiliary power buttonand activate the desired function.Machines equipped with the auxiliary power driveoption: The drive function will operate.Operation from Ground1 Turn the key switch to ground control.2 Pull out the red Emergency Stop button tothe on position.3 Gasoline/LPG models: Choose fuel by pressingthe fuel select button.4 Start the engine.To Position Platform1 Push and hold a function enable/speed select button.2 Push the appropriate function buttonaccording to the markings on thecontrol panel.Drive and steer functions are notavailable from the ground controls.