Genie s-60 Operator's Manual

Also see for S-60 HC: Maintenance manual Operator's manual Operator's manual Service manual Operator's manual

Contents

Genie s-60 Operator's Manual Manual pdf 35 page image

Operator's ManualFifth Edition • First PrintingPart No. 114306 S-60 • S-65 33Workplace InspectionBe aware of and avoid the following hazardoussituations:· drop-offs or holes· bumps, floor obstructions or debris· sloped surfaces· unstable or slippery surfaces· overhead obstructions and high voltageconductors· hazardous locations· inadequate surface support to withstand all loadforces imposed by the machine· wind and weather conditions· the presence of unauthorized personnel· other possible unsafe conditionsDo Not Operate Unless:You learn and practice the principles of safemachine operation contained in this operator'smanual.1 Avoid hazardous situations.2 Always perform a pre-operationinspection.3 Always perform function tests prior to use.4 Inspect the workplace.Know and understand the workplaceinspection before going on to the nextsection.5 Only use the machine as it was intended.FundamentalsThe workplace inspection helps the operatordetermine if the workplace is suitable for safemachine operation. It should be performed by theoperator prior to moving the machine to theworkplace.It is the operator's responsibility to read andremember the workplace hazards, then watch forand avoid them while moving, setting up andoperating the machine.Inspections