Gentsys R3 Installation Manual
                                                        | |
Contents
| 
The R3 & R5 rotary swing gate systems are designed to open and close swing gates. The CP75 controlleris capable of handling both single and double swing gates and offers many features to suit almost anyapplication.Detailed specifications for the R3 & R5 motors are shown in the figure below and the table alongside.The unit employs a battery driven DC motor for low duty domestic applications, which provides automaticbackup protection in the event of a power failure. The unit can also be fitted with a high duty power supplyin addition to the battery to allow for more frequent operation of the gate.The R3 & R5 operators are fitted with an internal electronic limit switch system, which provides reliableand accurate positioning of the gate. This system allows the operator to smoothly slow the gate down atthe fully open or closed positions.A fail-safe and highly reliable collision sensing system is built into the controller, which will cause themotor to stop while the gate is opening, and stop and reverse when closing if a gate is obstructed in anyway. (The collision sensitivity will be reduced during the endpoints of sinusoidal motion).Gate movement is transmitted to the gate by means of articulated arms. The length of both the drive armand the connecting arm is easily adjusted to give maximum installation flexibility.SpecificationsGeneral DescriptionGeneral DescriptionGeneral DescriptionFigure 1 Overall Dimensions220mm100mm337mm234mmPage 8337mm110mm220mm237mm110mm |
manualsdatabase
Your AI-powered manual search engine