German Light Products impression X4S Instruction Manual
                     | |
GLP German Light Products GmbH (Instruction version: 1.1) / from software version: V1.09 62 Preparation and Installation2.1 Safety informationThe IIMMPPRREESSSSIIOONN XX44SS fixtures from GLP is fitted with a number of plano-convex lenses in a highly efficient collimator cluster. This type of lens can act asa strong magnifying glass.If the rays from a strong light source (such as the sun or another lighting fixture)are directed towards the front of any of these fixtures, then internal damagemay occur. In a worst case scenario with a high power light source this canhappen very quickly, damaging the fixture internally, potentially meltingcomponents or causing an internal fire within seconds.In order to avoid these possible problems please adhere to the followingrequirements:• Do not expose the front of a fixture to direct sunlight or any other stronglight sources.• For outdoor applications during daylight make sure that the front face ofany fixture is either shielded or points away from the sun, even whenfixtures are not in use.• Do not modify the front glass or lenses of any fixture.These requirements have to be followed regardless of whether a fixture ispowered on or off as the magnifying effect is an optical effect and thereforeindependent from the (electrical) state of the fixture.Especially when working with high powered bbeeaamm--lliigghhttss; extreme caution andobservance of these safety instructions is mandatory.Should you have any questions about the operation of your fixture then pleasecontact your local GLP office, or their authorized distributor, a list of which canbe found at http://www.glp.de. |
Related manuals for German Light Products impression X4S
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine