German Light Products impression X4S Instruction Manual
                     | |
GLP German Light Products GmbH (Instruction version: 1.1) / from software version: V1.09 9A safe and sound installation can not be assured in this way. In additionthis can damage the fixture base.2x half-couplers 1x half-coupler2.3 Securing the FixtureRegardless of the mounting method of the IIMMPPRREESSSSIIOONN XX44SS you'll have to usea stipulated safety wire. Attach the safety wire through one of the two holesprovided on the base of the fixture and connect it to the primary supportstructure. Pay attention to a safe and proper fastening. The safety cable mustcomply with BGI 810-3 (EN 60598-2-17 Section 17.6.6) and be capable ofbearing a static suspended load that is ten times the weight of the fixture and allinstalled accessories.2.4 Connections2.4.1 Power Supply~100-240 Volt AC, 50-60 Hz, earth contact type plugConnected load 130 VA (W) <=> T5A (micro-fuse 5x20mm)Please see printing on the case for the right electronic supply!Disconnect from the mains supply for changing the fuse and useonly the above described micro-fuse type.2.4.2 DMXUSITT DMX-512 Standard input/output in 5-pin connectors.Pin 1 = [Ground] / Pin 2 = [-] / Pin 3 = [+] / Pin 4&5 N.C.The DMX- Addressing starts at the DMX- Address [001]. |
Related manuals for German Light Products impression X4S
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine