3. Click Network Connections, then double-click the Wireless NetworkConnection icon .4. Click Properties in the Wireless Network Connection Status dialogbox.5. You can configure your WLAN settings in the Wireless NetworkConnection Properties dialog box.Turning Off/On the WLAN RadioNOTE: The FAA (Federal Aviation Agency) has deemed it unsafe to operate wirelessdevices in aircraft as this may interfere with flight safety. Remember to turn off wirelessLAN when using your computer in the airplane.Your computer has a built-in Fn+F11 WLAN hot key to switch the WLANon/off (see “Hot Keys” in Chapter 2). The WLAN indicator ( ) glowsto indicate that the computer is ready for WLAN connection.If you need to temporarily turn off the radio, press Fn+F11. To resumenetwork connection, press Fn+F11 again.It takes approximately 30 seconds for your computer to make a successfulWLAN connection and approximately 10 seconds to disconnect.Connecting to a Wireless NetworkTo connect to a wireless network:1. Make sure that the WLAN radio is on.2. Click Start and then All Programs.3. Click Intel PROSet Wireless and then Intel PROSet Wireless.2-28 Operating Your Computer
