Regulatory Information B-6On the Use of the RF DeviceNOTE: The information in this section applies to models with thewireless LAN module.USA and Canada Safety Requirementsand NoticesIMPORTANT NOTE: To comply with FCC RF exposure compliancerequirements, the antenna used for this transmitter must be installed toprovide a separation distance of at least 20 cm from all persons and mustnot be co-located or operating in conjunction with any other antenna ortransmitter.Radio Frequency Interference Requirementsand SARThe FCC with its action in ET Docket 93-62 has adopted a safety standardfor human exposure to Radio Frequency (RF) electromagnetic energyemitted by FCC certified equipment. The wireless LAN module meets theHuman Exposure limits found in OET Bulletin 65, 2001, and ANSI/IEEEC95.1, 1992. Proper operation of this radio according to the instructionsfound in this manual will result in exposure substantially below theFCC’s recommended limits. The following safety precautions should beobserved:z Do not touch or move antenna while the unit is transmitting orreceiving.z Do not hold any component containing the radio such that theantenna is very close or touching any exposed parts of the body,especially the face or eyes, while transmitting.z Do not operate the radio or attempt to transmit data unless the antennais connected; if not, the radio may be damaged.Use in specific environments:
