29For local configuration, after you power on the router, you can see the startup banner. See section StartupProcess.3. After completing the power-on self-test (POST), the system asks you to press . When theprompt appears, you may proceed to configure the router.Startup ProcessAfter power-on or during the reboot process, the following information is displayed on the terminal:System application is starting...Booting Normal Extend BootWare........The Extend BootWare is self-decompressing...................Done!*************************************************************************** ** MSR20-40 BootWare, Version 3.01 ** ***************************************************************************Compiled Date : Jul 7 2008CPU Type : MPC8248CPU L1 Cache : 16KBCPU Clock Speed : 400MHzMemory Type : SDRAMMemory Size : 384MBMemory Speed : 100MHzBootWare Size : 4096KBFlash Size : 4MBcfa0 Size : 64MBCPLD Version : 130.0PCB Version : 2.0BootWare Validating...Press Ctrl+B to enter extended boot menu...Press Ctrl+B to enter the extended Boot ROM menu. Otherwise, the system goes into the programdecompression process.NOTE:Press Ctrl + B within six seconds after “Press Ctrl+B to enter extended boot menu...” appears to enter theextended Boot ROM menu. Otherwise, the system goes into the program decompression process. Youneed to restart the router if you want to enter the extended Boot ROM menu after the decompressionprocess.starting to get the main application file--cfa0:/main.bin!............
