H3C MSR 50-40 Installation Manual

Also see for MSR 50-40: User manual

Contents

H3C MSR 50-40 Installation Manual Manual pdf 72 page image

64==========================================================================|<1> +Main ||<2> -Main ||<3> +Backup ||<4> -Backup ||<0> Exit |==========================================================================Enter your choice(0-4):You can set the file type to M (main) or B (backup) or cancel the setting by entering digits 1 to 4. Referto Introduction on page 41 for details.Deleting filesEnter 4 in the file control submenu to delete files:Deleting the file in cfa0:'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED==========================================================================|NO. Size(B) Time Type Name ||1 640199 Dec/20/2007 09:53:16 N/A cfa0:/logfile/logfile.log ||2 22165484 Dec/20/2007 09:18:10 B+S cfa0:/update.bin ||3 1181 Dec/20/2007 09:42:54 N/A cfa0:/startup.cfg ||4 22165484 Dec/20/2007 09:42:28 M cfa0:/main.bin ||0 Exit |==========================================================================Enter file No:Enter the number of the file to be deleted and press Enter, and then the system displays:The file you selected is cfa0:/backup.bak,Delete it? [Y/N]YDeleting........Done!CAUTION:You can set the main or backup attribute only for the application and configuration file in the rootdirectory, and the full filename (including the path) of the application file must not exceed 63 characters.Returning to the main BootWare menuReturn to the main BootWare menu.Dealing with Password LossUse the following solutions when your BootWare password, user password or Super Password is lost.User Password LossYou cannot enter the system if you lose your user password. In this case, you can boot the system byignoring the system configuration. Perform the following operations to set a new user password:Step1 Enter the main BootWare menu, and enter 6 to boot the system by ignoring the system configuration.The system displays:Flag Set Success.