H3C S1016 User Manual
               | |
User ManualH3C S1016/1024 Ethernet Switch Chapter 2 Switch Installation2-3z Keep the switch far away from high-power radio launchers,radar launchers, and equipment with high-frequency andhigh-current.z Use electromagnetic shielding if necessary. For example,you can use shielded port cable.z Travel the port cable indoors. Outdoor cabling is prohibited,so as to prevent the signal port from possible damages thatmay be caused by overvoltage and overcurrent of lightningstrike.2.2 Installing the SwitchNote:During installation, you are recommended to wear an ESD-preventivewrist strip, which can be connected to the grounding screw of thecabinet, to eliminate possible static damage to the switch.2.2.1 Sticking FeetStep 1: Remove the paper covering the adhesive end of the feet.Step 2: Stick the adhesive end of the feet to the circular recess onthe bottom of the chassis.2.2.2 Connecting Power CordStep 1: Check if the required power supply unit is used.Step 2: Insert one end of the power cord to the input socket of theswitch and the other end to the socket of the external power supply. |
Related manuals for H3C S1016
manualsdatabase
Your AI-powered manual search engine