13Figure 7 Install the cage nuts (S10508)111111: Cage nutsNOTE:When preparing for installation, make sure that the total height of the switches to be installed is no higherthan the height of the cabinet, and reserve enough clearance for cable routing.Installing accessories to the chassisInstalling mounting brackets and cable management bracketsBefore installing the switch to the cabinet, install the mounting brackets and cable management bracketsshipped with the switch. Mounting brackets are used for fixing the chassis to the cabinet, and cablemanagement brackets (signal cable and power cable management brackets) for cabling the switch.• S10508-V: Install the mounting brackets and cable management brackets separately to the chassis.For more information, see “Installing the cable management brackets” and “Installing the mountingbrackets.”• S10508: Install the power cable management brackets to the chassis. The installation proceduresare the same as S10508-V. The signal cable management brackets have been installed to themounting brackets when the switch was shipped. For how to install the mounting brackets, see“Installing the mounting brackets.”• S10504: The power cable management brackets are installed on the chassis. For how install thepower cable management brackets, see “Installing the cable management brackets.” The signalcable management brackets have been installed to the mounting brackets when the switch wasshipped. For how to install the mounting brackets, see “Installing the mounting brackets.”
