62Appendix B FRUs and compatibility matrixesMPUThe main processing unit (MPU) is the core of the control management plane for the H3C S10500 SwitchSeries. The H3C S10500 Switch Series supports the MPU model LSU1SUPA0 (LSUM1SUPA0).Table 22 LSU1SUPA0 (LSUM1SUPA0) supervisor engine specificationsItem LSU1SUPA0 (LSUM1SUPA0) supervisor engineService interface • One console port for local or remote dialup configuration management• One 10/100/1000BASE-T interface for management and upgradeInterface transmissionrate• Console port: no grater than 115200 bps and defaults to 9600 bps• 10/100/1000BASE-T interface: 10/100/1000 Mbps, half/full duplexCables and maxtransmission distance• Console port: common asynchronous serial interface cables, max transmissiondistance of no greater than 15 m (49.21 ft)• 10/100/1000BASE-T interface: Category-5 twisted pairs, max transmissiondistance of 100 m (328.08 ft)The H3C S10500 Switch Series supports two MPUs. You can order one or two LSU1SUPA0(LSUM1SUPA0) supervisor engines as needed.LPUThe H3C S10500 Switch Series supports various LPU models. The number and type of interfacesprovided by an LPU depend on the LPU model.NOTE:• The model of a card is LSUM-prefixed on the card package and LSU-prefixed on the card panel. Forexample, LSU1TGS16SC0 and LSUM1TGS16SC0 identify the same card. When you order a card, referto the card by its LSUM-prefixed model. In this chapter, the card models are LSU-prefixed, the same asmarked on the card panels.• The LPUs in Table 23 apply to all the S10500 switches.Table 23 LPU specificationsLPU model Description ConnectorNumberofinterfacesInterfacetransmissionrateAvailabletransceivermodulesLSU1TGS16SC016-port 10-GigabitSFP+ opticalEthernet interfacecardLC 16 10 Gbps• 10-Gigabit SFP+module• 10-Gigabit SFP+cable
