H3C S3100-52P Command Manual

Also see for S3100-52P: Operation manual Operation manual Operation manual Operation manual Operation manual

Contents

Command Manual – VLAN-VPNH3C S3100-52P Ethernet Switch Chapter 2 Selective QinQ Configuration Commands2-3all: Removes all configurations of encapsulating an outer VLAN tag for specified innerVLANs in the current view.DescriptionUse the raw-vlan-id inbound command to specify to encapsulate packets with thespecified inner VLAN tags with the specified outer tag. This command must beconfigured on ports connecting the user network.Use the undo raw-vlan-id inbound command to remove the configuration.By default, the switch does not encapsulate packets with any outer VLAN tag.Caution:A packet cannot be tagged with different outer VLAN tags. To change the outer VLANtag of a packet, you need to remove the existing outer VLAN tag configuration andconfigure a new outer VLAN tag.Before configuring this command in QinQ view, you need to use the vlan-vpn vidcommand to configure the outer VLAN tag to be used in the selective QinQ policy.Related commands: vlan-vpn vid.Examples# Configure Ethernet 1/0/1 to add the tag of VLAN 20 as the outer tag to packets withtheir inner VLAN IDs being 8 through 15. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface Ethernet 1/0/1[Sysname-Ethernet1/0/1] vlan-vpn vid 20[Sysname-Ethernet1/0/1-vid-20] raw-vlan-id inbound 8 to 152.1.3 vlan-vpn vidSyntaxvlan-vpn vid vlan-idundo vlan-vpn vid vlan-idViewEthernet port view