H3C S3100-52P Command Manual

Also see for S3100-52P: Operation manual Operation manual Operation manual Operation manual Operation manual

Contents

Command Manual – VLAN-VPNH3C S3100-52P Ethernet Switch Chapter 1 VLAN-VPN Configuration Commands1-3System View: return to User View with Ctrl+Z.[Sysname] interface Ethernet 1/0/1[Sysname-Ethernet1/0/1] vlan-vpn enable1.1.3 vlan-vpn inner-cos-trustSyntaxvlan-vpn inner-cos-trust enableundo vlan-vpn inner-cos-trustViewEthernet port viewParametersNoneDescriptionUse the vlan-vpn inner-cos-trust enable command to enable the inner-to-outer tagpriority replicating feature.With the feature enabled, a port replicates the inner tag priority to the outer tag whenadding an outer tag for a packet.Use the undo vlan-vpn inner-cos-trust command to disable the feature.By default, the inner-to-outer tag priority replicating feature is disabled, and the switchwill use the priority of the receiving port as the outer tag priority of packets. Fordescriptions on receiving port priority, refer to QoS-QoS Profile Operation.Note that:z This feature can be enabled only on VLAN-VPN-enabled ports.z This command is mutually exclusive with the vlan-vpn priority command.Examples# Enable the inner-to-outer tag priority replicating feature for Ethernet 1/0/2. system-viewSystem View: return to User View with Ctrl+Z.[Sysname] interface Ethernet 1/0/2[Sysname-Ethernet1/0/2] vlan-vpn inner-cos-trust enable1.1.4 vlan-vpn prioritySyntaxvlan-vpn priority inner-priority remark outer-priority