Command Manual – Static RouteH3C S3100-52P Ethernet SwitchChapter 1 IP Routing TableCommands1-12State: Age: 20:17:42 Cost: 0/0**Destination: 2.2.2.0 Mask: 255.255.255.0Protocol: #DIRECT Preference: 0*NextHop: 2.2.2.1 Interface: 2.2.2.1(Vlan-interface2)State: Age: 20:08:05 Cost: 0/0For descriptions of route states, see Table 1-2.Table 1-5 lists the statistics of the routing table.Table 1-5 Description on the fields of the display ip routing-table verbose commandField DescriptionHolddown Number of suppressed routesDelete Number of deleted routesHidden Number of hidden routes1.1.9 reset ip routing-table statistics protocolSyntaxreset ip routing-table statistics protocol { all | protocol }ViewUser viewParametersall: Specifies all protocols.protocol: Specifies a protocol, which can be direct, or static.DescriptionUse the reset ip routing-table statistics protocol command to clear the statistics ofroutes in a routing table.Examples# Before executing the reset ip routing-table statistics protocol command, use thedisplay ip routing-table statistics command to display the routing statistics: display ip routing-table statisticsRouting tables:Proto route active added deletedDIRECT 4 4 12 8
