H3C S3100-52P Operation Manual

Also see for S3100-52P: Operation manual Operation manual Operation manual Operation manual Operation manual

Contents

Operation Manual – VLANH3C S3100-52P Ethernet Switch Chapter 2 VLAN Configuration2-8[SwitchB] vlan 100[SwitchB-vlan100] description Dept1[SwitchB-vlan100] port Ethernet 1/0/13[SwitchB-vlan103] quit# Create VLAN 200, specify its descriptive string as Dept2 and add Ethernet 1/0/11 andEthernet 1/0/12 to VLAN 200.[SwitchB] vlan 200[SwitchB-vlan200] description Dept2[SwotchB-vlan200] port Ethernet1/0/11 Ethernet 1/0/12[SwitchB-vlan200] quitz Configure the link between Switch A and Switch B.Because the link between Switch A and Switch B needs to transmit data of both VLAN100 and VLAN 200, you can configure the ports at both ends of the link as trunk portsand permit packets of the two VLANs to pass through the two ports.# Configure Ethernet 1/0/2 of Switch A.[SwitchA] interface Ethernet 1/0/2[SwitchA-Ethernet1/0/2] port link-type trunk[SwitchA-Ethernet1/0/2] port trunk permit vlan 100[SwitchA-Ethernet1/0/2] port trunk permit vlan 200# Configure Ethernet 1/0/10 of Switch B.[SwitchB] interface Ethernet 1/0/10[SwitchB-Ethernet1/0/10] port link-type trunk[SwitchB-Ethernet1/0/10] port trunk permit vlan 100[SwitchB-Ethernet1/0/10] port trunk permit vlan 2002.3 Configuring a Protocol-Based VLAN2.3.1 Protocol-Based VLAN Configuration Task ListComplete these tasks to configure protocol-based VLAN:Task RemarksConfiguring a Protocol Template for a Protocol-Based VLAN RequiredAssociating a Port with a Protocol-Based VLAN RequiredDisplaying Protocol-Based VLAN Configuration Optional2.3.2 Configuring a Protocol Template for a Protocol-Based VLANI. Configuration prerequisitesCreate a VLAN before configuring the VLAN as a protocol-based VLAN.