H3C S3100-52P Operation Manual

Also see for S3100-52P: Operation manual Operation manual Operation manual Operation manual Operation manual

Contents

Operation Manual – VLANH3C S3100-52P Ethernet Switch Chapter 2 VLAN Configuration2-13VLAN Type: Protocol-based VLANProtocol Index Protocol Type0 ip1 ethernetii etype 0x0806VLAN ID: 200VLAN Type: Protocol-based VLANProtocol Index Protocol Type0 at# Configure Ethernet 1/0/10 as a hybrid port, which removes the VLAN tag of thepackets of VLAN 100 and VLAN 200 before forwarding the packets.[Switch-vlan100] quit[Switch] interface Ethernet 1/0/10[Switch-Ethernet1/0/10] port link-type hybrid[Switch-Ethernet1/0/10] port hybrid vlan 100 200 untagged# Associate Ethernet 1/0/10 with protocol template 0 and 1 of VLAN 100, and protocoltemplate 0 of VLAN 200.[Switch-Ethernet1/0/10] port hybrid protocol-vlan vlan 100 0 to 1[Switch-Ethernet1/0/10] port hybrid protocol-vlan vlan 200 0# Display the associations between Ethernet 1/0/10 and the VLAN protocol templatesto verify your configuration.[Switch-Ethernet1/0/10] display protocol-vlan interface Ethernet 1/0/10Interface:Ethernet1/0/10VLAN ID Protocol-Index Protocol-Type100 0 ip100 1 ethernetii etype 0x0806200 0 atThe above output information indicates that Ethernet 1/0/10 has already beenassociated with the corresponding protocol templates of VLAN 100 and VLAN 200.Thus, packets from the IP and AppleTalk workstations can be automatically assigned toVLAN 100 and VLAN 200 respectively for transmission by matching the correspondingprotocol templates, so as to realize the normal communication between workstationsand servers.

/ 25

Related manuals for H3C S3100-52P