H3C S3100 Series Operation Manual

Also see for S3100 Series: Configuration Command manual Operation manual Installation manual Command manual

Contents

H3C S3100 Series Operation Manual Manual pdf 13 page image

Operation Manual (For Soliton) – VLANH3C S3100 Series Ethernet Switches Chapter 2 VLAN Configuration2-2Caution:z VLAN 1 is the system default VLAN, which needs not to be created and cannot beremoved, either.z The VLAN you created in the way described above is a static VLAN. On the switch,there are dynamic VLANs which are registered through GVRP. For details, refer to“GVRP” part of this manual.z When you use the vlan command to create VLANs, if the destination VLAN is anexisting dynamic VLAN, it will be transformed into a static VLAN and the switch willoutput the prompt information.2.1.3 Basic VLAN Interface ConfigurationI. Configuration prerequisitesBefore configuring a VLAN interface, create the corresponding VLAN.II. Configuration procedureFollow these steps to perform basic VLAN interface configuration:To do... Use the command... RemarksEnter system view system-view —Create a VLANinterface and enterVLAN interface viewinterfaceVlan-interfacevlan-idRequiredBy default, there is no VLANinterface on a switch.Specify thedescription string forthe current VLANinterfacedescription textOptionalBy default, the description string of aVLAN interface is the name of thisVLAN interface. Vlan-interface1Interface for example.