H3C S3100 Series Operation Manual

Also see for S3100 Series: Configuration Command manual Operation manual Installation manual Command manual

Contents

H3C S3100 Series Operation Manual Manual pdf 24 page image

Operation Manual (For Soliton) – VLANH3C S3100 Series Ethernet Switches Chapter 2 VLAN Configuration2-132.4.4 Displaying Protocol-Based VLAN ConfigurationTo do... Use the command... RemarksDisplay the information about theprotocol-based VLANdisplay vlan [ vlan-id [ to vlan-id ]| all | dynamic | static]Display the protocol informationand protocol indexes configuredon the specified VLANdisplay protocol-vlan vlan{ vlan-id [ to vlan-id ] | all }Display the protocol informationand protocol indexes configuredon the specified portdisplay protocol-vlan interface{ interface-type interface-number[ to interface-typeinterface-number ] | all }Available inany view2.4.5 Protocol-Based VLAN Configuration ExampleI. Network requirementsz As shown in Figure 2-3, Workroom connects to the LAN through port Ethernet1/0/10 on the S3100 switch.z IP network and AppleTalk network workstations (hosts) coexist in the Workroom.z The S3100 switch connects to VLAN 100 (using IP network) through Ethernet1/0/11 and to VLAN 200 (using AppleTalk network) through Ethernet 1/0/12.z Configure the switch to automatically assign the IP and AppleTalk packets toproper VLANs for transmission, so as to ensure the normal communicationbetween the workstations and servers.II. Network diagramFigure 2-3 Network diagram for protocol-based VLAN configuration

/ 26

Related manuals for H3C S3100 Series