H3C S3100V2 Series Installation Manual

Also see for S3100V2 Series: Installation, quick start

Contents

53Appendix B Ports and LEDsPortsConsole portAll S3100V2 switches have one console port on the front panel.Table 17 Console port specificationsItem SpecificationConnector type RJ-45Compliant standard Asynchronous EIA/TIA-232Transmission baud rate 9600 bps (default) to 115200 bpsServices• Provides connection to an ASCII terminal.• Provides connection to the serial port of a local or remote (through a pair ofmodems) PC running terminal emulation program.10/100Base-TX Ethernet portAll S3100V2 switches provide 10/100Base-TX auto-sensing Ethernet ports on their front panels.Table 18 10/100Base-TX Ethernet port specificationsItem SpecificationConnector type RJ-45Interface attributes• 10 Mbps, full/half duplex• 100 Mbps, full/half duplex• MDI/MDI-X, auto-sensingMax transmission distance 100 m (328.08 ft)Transmission medium Category-5 twisted pair cableStandards IEEE 802.3i, 802.3uCombo interfaceAll S3100V2 switches offer combo interfaces. Each combo interface has one 100/1000Base-X fiber SFPport and one 10/100/1000Base-T auto-sensing copper Ethernet port. These two ports share one portname and port view and cannot work simultaneously. When you activate one port (by using the comboenable { copper | fiber } command, the other port automatically shuts down. For the number of combointerfaces available on each S3100V2 switch, see Table 13, Table 14, and Table 15.