H3C S3600 Series Installation Manual

Also see for H3C S3600 Series: Datasheet Installation manual Command manual Operation manual Operation manual

H3C S3600 Series Installation Manual Manual pdf 26 page image

3-11In case the switch is powered on, when connecting a PC to the switch, first connect the DB-9 connectorof the console cable to the PC and then the RJ-45 connector to the switch; when disconnecting them,remove the RJ-45 connector prior to the DB-9 connector.Verifying Installationz The correct power source is used.z The ground wire is securely connected.z Both of the console cable and power cord are correctly connected.z All the interface cables are routed indoors. If there are cables outdoors, check that the socket stripwith lightning protection and lightning arresters for network ports have been correctly connected.