H3C S3600 Series Installation Manual

Also see for H3C S3600 Series: Datasheet Installation manual Command manual Operation manual Operation manual

H3C S3600 Series Installation Manual Manual pdf 58 page image

5-26Enter your choice(0-4):You can set the file attribute to M (main) or B (backup), or cancel the setting by selecting a choice from1 to 4. For details of each type of files, refer to Overview on page 5-1.Setting application file attributes at the CLIIn the following description the files main.app and main_bak.app mentioned above are taken asexamples.# Change the attribute of the file main.app file from B to M + B. boot-loader file main.app mainThis command will set the boot file of the specified board. Continue? [Y/N]:The specified file will be used as the main boot file at the next reboot!For details about the boot-loader command, refer to H3C S3600 Series EPON OLT SwitchesOperation Manual.Deleting a FileDeleting a file on the BootWare menuSelect 3 from the file control sub-menu. The following information appears:Deleting the file in flash:'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED======================================================================|NO. Size(B) Time Type Name ||1 9342824 Aug/08/2008 20:00:00 M flash:/s3600-2p-olt.app ||2 388 Apr/26/2000 13:12:08 N/A flash:/private-data.txt ||3 4 Apr/26/2000 18:58:20 N/A flash:/snmpboots ||0 Exit |======================================================================Enter file No:Enter the file number, which is 4 in this example. The following information appears:The file you selected is flash:/snmpboots,Delete it? [Y/N]Enter Y.If the system displays the following information, the file has been successfully deleted:Deleting...........Done!Deleting a file at the CLIYou can delete a file using the delete [ /unreserved ] file-url command in user view. In the command,/unreserved deletes a file permanently, and file-url specifies the file to be deleted.# Delete the file test.txt in the root directory.