H3C S3610 Series Operation Manual

Also see for S3610 Series: Configuration Quick start Operation manual Operation manual Operation manual

H3C S3610 Series Operation Manual Manual pdf 30 page image

Operation Manual – System Maintenance and DebuggingH3C S3610&S5510 Series Ethernet Switches Chapter 3 Device Management3-2modules, you can load/download software/files conveniently to the switch through anEthernet port.This chapter introduces how to load BootROM and host software to a switch locally andhow to do this remotely.3.2.1 Introduction to Loading ApproachesI. You can load software locally by using:z XMODEM through Console portz TFTP through Ethernet portz FTP through Ethernet portII. You can load software remotely by using:z FTPz TFTPNote:The BootROM software version should be compatible with the host software versionwhen you load the BootROM and host software.3.2.2 Local Software LoadingIf your terminal is directly connected to the switch, you can load the BootROM and hostsoftware locally.Before loading the software, make sure that your terminal is correctly connected to theswitch to insure successful loading.Note:The loading process of the BootROM software is the same as that of the host software,except that during the former process, you should press and afterentering the Boot Menu and the system gives different prompts. The following textmainly describes the BootROM loading process.I. Boot MenuStarting......