12Step Command Remarks3. Reject the Ethernet OAMremote loopback request froma remote port.oam loopback reject-requestBy default, a port does not rejectthe Ethernet OAM remoteloopback request from a remoteport.Displaying and maintaining Ethernet OAMconfigurationTask Command RemarksDisplay global Ethernet OAMconfiguration.display oam configuration [ |{ begin | exclude | include }regular-expression ]Available in any viewDisplay the statistics on criticalevents after an Ethernet OAMconnection is established.display oam critical-event[ interface interface-typeinterface-number ] [ | { begin |exclude | include }regular-expression ]Available in any viewDisplay the statistics on EthernetOAM link error events after anEthernet OAM connection isestablished.display oam link-event { local |remote } [ interface interface-typeinterface-number ] [ | { begin |exclude | include }regular-expression ]Available in any viewDisplay the information about anEthernet OAM connection.display oam { local | remote }[ interface interface-typeinterface-number ] [ | { begin |exclude | include }regular-expression ]Available in any viewClear statistics on Ethernet OAMpackets and Ethernet OAM linkerror events.reset oam [ interface interface-typeinterface-number ] Available in user viewEthernet OAM configuration exampleNetwork requirementsOn the network shown in Figure 2, perform the following operations:• Enable Ethernet OAM on Device A and Device B to auto-detect link errors between the two devices• Monitor the performance of the link between Device A and Device B by collecting statistics aboutthe error frames received by Device AFigure 2 Network diagram
