42Figure 13 Network diagramConfiguration procedures1. Configure Device A:# Configure ACL 2001 and ACL 2002 to match traffic from Server and Host A, respectively. system-view[DeviceA] acl number 2001[DeviceA-acl-basic-2001] rule permit source 1.1.1.1 0[DeviceA-acl-basic-2001] quit[DeviceA] acl number 2002[DeviceA-acl-basic-2002] rule permit source 1.1.1.2 0[DeviceA-acl-basic-2002] quit# Create a class named server, and use ACL 2001 as the match criterion. Create a class namedhost, and use ACL 2002 as the match criterion.[DeviceA] traffic classifier server[DeviceA-classifier-server] if-match acl 2001[DeviceA-classifier-server] quit[DeviceA] traffic classifier host[DeviceA-classifier-host] if-match acl 2002[DeviceA-classifier-host] quit# Create a behavior named server, and configure the CAR action for the behavior as follows: setthe CIR to 1024 kbps, and mark the excess packets (red packets) with DSCP value 0 and transmitthem.[DeviceA] traffic behavior server[DeviceA-behavior-server] car cir 1024 red remark-dscp-pass 0[DeviceA-behavior-server] quit# Create a behavior named host, and configure the CAR action for the behavior as follows: set theCIR to 256 kbps.[DeviceA] traffic behavior host[DeviceA-behavior-host] car cir 256[DeviceA-behavior-host] quit# Create a QoS policy named car, and associate class server with behavior server and class hostwith behavior host.[DeviceA] qos policy car[DeviceA-qospolicy-car] classifier server behavior server[DeviceA-qospolicy-car] classifier host behavior host
