H3C S5500-EI Series Operation Manual

Also see for S5500-EI series: Operation manual Operation manual Configuration guide Operation manual – port security Configuration guide

Contents

H3C S5500-EI Series Operation Manual Manual pdf 5 page image

Operation Manual – LLDPH3C S5500-EI Series Ethernet Switches Chapter 1 LLDP Configuration1-42) IEEE 802.3 defined LLDP TLVs include the following:z MAC/PHY configuration/status TLV, which carries port configuration, such as portspeed, duplex state, whether port speed auto-negotiation is supported, the state ofauto-negotiation, current speed , and current duplex state.z Power via MDI TLV, which carries information about power supply capabilities.z Link aggregation TLV, which carries the capability and state of link aggregation.z Maximum frame size TLV, which carries the maximum frame size supported,namely, MTU (maximum transmission unit).III. MED related LLDP TLVsz LLDP-MED capabilities TLV, which carries the MED type of the current device andthe types of the LLDP MED TLVs that can be encapsulated in LLDPDUs.z Network policy TLV, which carries port VLAN ID, supported applications (such asvoice and video services), application priority, and the policy adopted.z Extended power-via-MDI TLV, which carries the information about the powersupply capability of the current device.z Hardware revision TLV, which carries the hardware version of an MED device.z Firmware revision TLV, which carries the firmware version of an MED device.z Software revision TLV, which carries the software version of an MED device.z Serial number TLV, which carries the serial number of an MED device.z Manufacturer name TLV, which carries the manufacturer name of an MED device.z Model name TLV, which carries the model of an MED device.z Asset ID TLV, which carries the asset ID of an MED device. Asset ID is used fordirectory management and asset tracking.z Location identification TLV, which carries the location identification of a device.Location identification can be used in location-based applications.Note:For detailed information about LLDP TLV, refer to IEEE 802.1AB-2005 andANSI/TIA-1057.1.1.4 Protocols and Standardsz IEEE 802.1AB-2005, Station and Media Access Control Connectivity Discoveryz ANSI/TIA-1057, Link Layer Discovery Protocol for Media Endpoint Devices1.2 LLDP Configuration Tasks ListComplete these tasks to configure LLDP: