H3C S5500-EI Series Operation Manual

Also see for S5500-EI series: Operation manual Operation manual Configuration guide Operation manual – port security Configuration guide

Contents

H3C S5500-EI Series Operation Manual Manual pdf 7 page image

Operation Manual – LLDPH3C S5500-EI Series Ethernet Switches Chapter 1 LLDP Configuration1-61.3.2 Setting LLDP Operating ModeFollow these steps to set LLDP operating mode:To do… Use the command… RemarksEnter system view system-view —Set the initialization delayperiodlldp timer reinit-delayvalueOptional2 seconds by default.EnterEthernetinterfaceviewinterface interface-typeinterface-numberEnterEthernetinterfaceview/portgroupview Enter portgroup viewport-group{ aggregation agg-id |manualport-group-name }Either of the two isrequired.Configuration performedin Ethernet interface viewapplies to the current portonly; configurationperformed in port groupview applies to all theports in the correspondingport group.Set the LLDP operatingmodelldp admin-status{ disable | rx | tx | txrx }OptionalTxRx by default.1.3.3 Configuring LLDPDU TLVsFollow these steps to configure LLDPDU TLVs:To do… Use the command… RemarksEnter system view system-view —Set the TTL multiplier lldp hold-multiplier value Optional4 by default.EnterEthernetinterfaceviewinterface interface-typeinterface-numberEnterEthernetinterfaceview/portgroupviewEnterportgroupviewport-group { aggregationagg-id | manualport-group-name }Either of the two isrequired.Configuration performedin Ethernet interface viewapplies to the current portonly; configurationperformed in port groupview applies to all theports in the correspondingport group.