H3C S5510 Series Installation Manual

Also see for S5510 Series: Configuration Operation manual Operation manual Operation manual Command manual

Contents

H3C S5510 Series Installation Manual Manual pdf 17 page image

Installation ManualH3C S5510 Series Ethernet Switches Chapter 1 Product Overview1-10IV. DC-input voltage rangeRated voltage range: –48 VDC to –60 VDCRated voltage range: –36 VDC to –72 VDC1.3 S5510-24F-AC/S5510-24F-DC Ethernet Switch1.3.1 Front PanelI. IllustrationThe S5510-24F-AC and S5510-24F-DC have the same front panel. On the front panel,the S5510-24F-AC/S5510-24F-DC provides 24 x 1000 Mbps SFP ports, four fixed10/100/1000Base-T Combo ports and one Console port, as shown in Figure 1-4.(1) 1000 Mbps SFP port status LEDs(2) 10/100/1000Base-T Combo port status LEDs: S represents speed LED and D representsduplex LED(3) Console port (4) 7-segment numerical display LED(5) Host status LED (6) Power module 1 LED(7) Power module 2 LEDFigure 1-4 Front panel of the S5510-24F-AC/S5510-24F-DCEach of the four 10/100/1000Base-T Combo ports corresponds to an SFP port, sothere are four pairs of associated ports, as show in Table 1-7. In each pair of ports, youcan use only one port at a time.Table 1-7 Combo portsModule Combo port Corresponding SFP port25 2226 2427 21S5510-24F-AC/S5510-24F-DC28 23II. LEDsFor your convenience to monitor the operation of the switch, theS5510-24F-AC/S5510-24F-DC provides one host status LED, two power module LEDs,