11-20To do… Use the command… RemarksCreate an eBGP peer group group ipv6-group-name external RequiredSpecify the AS number of an IPv6peerpeer ipv6-address as-numberas-numberRequiredNot specified by default.Add the IPv6 peer into the peergrouppeer ipv6-address groupipv6-group-nameRequiredNot added by defaultWhen creating a mixed eBGP peer group, you need to create a peer and specify its AS number thatcan be different from AS numbers of other peers, but you cannot specify AS number for the eBGP peergroup.Configuring IPv6 BGP CommunityAdvertise community attribute to an IPv6 peer/peer groupFollow these steps to advertise community attribute to an IPv6 peer/peer group:To do… Use the command… RemarksEnter system view system-view —Enter BGP view bgp as-number —Enter IPv6 address family view ipv6-family —Advertise community attribute toan IPv6 peer/peer grouppeer { ipv6-group-name |ipv6-address }advertise-communityRequiredNot advertised by default.Advertise extended communityattribute to an IPv6 peer/peergrouppeer { ipv6-group-name |ipv6-address }advertise-ext-communityRequiredNot advertised by default.Apply a routing policy to routes advertised to a peer/peer groupFollow these steps to apply a routing policy to routes advertised to a peer/peer group:To do… Use the command… RemarksEnter system view system-view —Enter BGP view bgp as-number —Enter IPv6 address family view ipv6-family —
