H3C S5820X Series Acl And Qos Command Reference

Also see for s5800 series: Installation manual Instruction manual Command reference Quick start Troubleshooting guide

Contents

H3C S5820X Series Acl And Qos Command Reference Manual pdf 91 page image

80Congestion management configurationcommandsNOTE:The Layer 3 Ethernet interface in this chapter refers to the Ethernet port that can perform IP routing andinter-VLAN routing. You can set an Ethernet port as a Layer 3 Ethernet interface by using the portlink-mode route command (see theLayer 2—LAN Switching Configuration Guide).SP queuing configuration commandsdisplay qos spSyntaxdisplay qos sp interface [ interface-type interface-number ] [ | { begin | exclude | include }regular-expression ]ViewAny viewDefault level1: Monitor levelParametersinterface-type interface-number: Specifies an interface by its type and number.|: Filters command output by specifying a regular expression. For more information about regularexpressions, see the Fundamentals Configuration Guide.begin: Displays the first line that matches the specified regular expression and all lines that follow.exclude: Displays all lines that do not match the specified regular expression.include: Displays all lines that match the specified regular expression.regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256 characters.DescriptionUse the display qos sp interface command to view the strict priority (SP) queuing configuration of aninterface.If no interface is specified, this command displays the SP queuing configuration of all the interfaces.Related commands: qos sp.Examples# Display the SP queuing configuration of GigabitEthernet 1/0/1. display qos sp interface GigabitEthernet 1/0/1Interface: GigabitEthernet1/0/1