H3C S6520-SI Series Command Reference Manual

Also see for MS4600 Series: Troubleshooting guide Command reference

H3C S6520-SI Series Command Reference Manual Manual pdf 11 page image

5Field DescriptionLinkLink state of the IRF port:• UP—The IRF link is up.• DOWN—The IRF link is down because the port has no physical link orhas not been activated by the irf-port-configurationactive command.• DIS—No physical interfaces have been bound to the IRF port.• TIMEOUT—IRF hello interval has timed out.• ISOLATE—The device is isolated from the IRF fabric. This issue mightbe caused by the following reasons:{ The IRF fabric does not support the device model.{ The maximum number of member devices has exceeded the upperlimit.neighbor IRF member ID of the device connected to the IRF port.This field displays three hyphens (---) if no device is connected to the port.Belong To IRF fabric that has the device, represented by the CPU MAC address of themaster in the IRF fabric.Related commandsdisplay irfdisplay irf configurationdisplay madUse display mad to display MAD status and settings.Syntaxdisplay mad [ verbose ]ViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorParametersverbose: Displays detailed MAD information. If you do not specify this keyword, the command onlydisplays whether a MAD mechanism is enabled or disabled.Examples# Display brief MAD information. display madMAD ARP disabled.MAD ND disabled.MAD LACP enabled.MAD BFD enabled.# Display detailed MAD information. display mad verboseMulti-active recovery state: No