H3C S6520-SI Series Command Reference Manual

Also see for MS4600 Series: Troubleshooting guide Command reference

H3C S6520-SI Series Command Reference Manual Manual pdf 8 page image

2Field DescriptionDescriptionDescription you have configured for the member device.• If no description is configured, this field displays a dashed line (-----).• If the description exceeds the maximum number of characters that can bedisplayed, an ellipsis (…) is displayed in place of the exceeding text. Todisplay the complete description, use the displaycurrent-configuration command.Auto upgradeStatus of the software auto-update feature:• yes—Enabled.• no—Disabled.MAC persistentIRF bridge MAC persistence setting:• 6 min—Bridge MAC address of the IRF fabric remains unchanged for 6minutes after the address owner leaves.• always—Bridge MAC address of the IRF fabric does not change after theaddress owner leaves.• no—Bridge MAC address of the current master replaces the original bridgeMAC address as soon as the owner of the original address leaves.Domain ID Domain ID of the IRF fabric. The domain ID you assign to an IRF fabric mustuniquely identify the fabric in a multi-IRF fabric network.Related commandsdisplay irf configurationdisplay irf topologydisplay irf configurationUse display irf configuration to display basic IRF settings for each member device.Syntaxdisplay irf configurationViewsAny viewPredefined user rolesnetwork-adminnetwork-operatorExamples# Display basic IRF settings for all members. display irf configurationMemberID NewID IRF-Port1 IRF-Port21 1 Ten-GigabitEthernet2/0/5 Ten-GigabitEthernet1/0/62 2 Ten-GigabitEthernet2/0/5 Ten-GigabitEthernet2/0/6Ten-GigabitEthernet2/0/7Ten-GigabitEthernet2/0/84 4 Ten-GigabitEthernet4/0/5 Ten-GigabitEthernet4/0/6Ten-GigabitEthernet4/0/7Ten-GigabitEthernet4/0/8