Installation ManualH3C S7500E Series Ethernet Switches Chapter 6 Software Maintenance6-2of the SRPUs through the boot menu, refer to section 6.2.6 “Updating Boot ROMThrough a File on the Flash” on page 6-15.6.2.1 BOOT MenuUpon power-on, the switch will run the Boot ROM program first. The followinginformation will be displayed on the terminal:Starting......RAMLine.....OKSystem is booting...........***.....******************************************* ** H3C S7500E BOOTROM, Version 206 ** *******************************************Copyright(c) 2004-2008 Hangzhou H3C Technologies Co., Ltd.Creation date : Apr 11 2008, 10:15:28CPU type : BCM1125HCPU Clock Speed : 600MhzBUS Clock Speed : 66MhzBOOT_FLASH type : M29W040BFlash Size : 64MBMemory Size : 512MBMain board slot 0 self testing............................SDRAM Data lines selftest.................................OK!SDRAM Address lines selftest..............................OK!SDRAM fast selftest.......................................OK!CPLD selftest.............................................OK!FPGA selftest.............................................OK!The switch Mac address is .....................0000.FC00.7506Note:The above information may vary slightly with the models of S7500E series.Press Ctrl+B to enter Boot Menu... 5