Installation ManualH3C S7500E Series Ethernet Switches Chapter 1 Product Overview1-31Item SpecificationsFunctionsz It can be connected to an ASCII terminal.z It can be connected to a serial port of a localor remote (through a pair of modems) PCrunning terminal emulation program.z 10/100Base-TX management Ethernet portUsing an RJ-45 connector, the 10/100Base-TX management Ethernet port can beconnected to a local PC for switch program loading and switch debugging, orconnected to a remote NMS for remote management.Table 1-38 Specifications of the 10/100Base-TX Ethernet port for managementItem SpecificationsConnector type RJ-45Number of interfaces 1Interface speed 10/100 Mbps, half/full duplexCable medium and maximumtransmission distanceCategory-5 twisted pair, with a maximumtransmission distance of 100 m (328.08 ft.)Function Used for switch software upgrade and networkmanagementTable 1-39 Description of the status LEDs of the 10/100Base-TX managementEthernet portLED DescriptionLINK z OFF: No link is present.z ON: A link is present.ACT z OFF: No data is being transmitted or received.z Blinking: Data is being transmitted or received.V. System LEDsz System status LEDsThe LEDs on the card panel indicate the statuses of the power modules, fan tray,twelve LPUs, and LSQ1SRP2XB0 itself.z Power status LEDsPWR: The power status LEDs show the status of the power modules.
