H3C S7500 Series Command Manual
Also see for S7500 Series: Operation manualOperation manualOperation manualOperation manualCommand manual
                         | |
Contents
| 
Command Manual – PoEH3C S7500 Series Ethernet SwitchesChapter 2 PoE PSU Supervision ConfigurationCommands2-3Table 2-2 Description on the fields of the display poe-power alarm commandField DescriptionPSU is in normal state: The PSU operates normally.NOTLINK: The PSU is not linked (the controller fails tocommunicate with this PSU or the PSU is not inserted).You can clear the failure by powering off the PSU orinserting a PSU.INERROR: PSU input error. Restoring the normal ACinput can clear the error.OUTERROR: PSU output error (No normal DC outputfrom the PSU).HIGHVOL: Overvoltage on the PSU (the PSU is shutdown because of output overvoltage).HIGHTEP: It is overheated in the PSU.FANERROR: The fan fails.CLOSE: The PSU is shut down.CURLIMIT: The current of the PSU is limited.The alarm informationabout PoE PSU1Absent: The PSU is absent.2.1.3 display poe-power dc-output stateSyntaxdisplay poe-power dc-output stateViewAny viewParametersNoneDescriptionUse the display poe-power dc-output state command to display the DC output stateof the current PoE PSUs.Examples# Display the DC output states of the current PoE PSUs. |
Related manuals for H3C S7500 Series
H3C S7500 Series Command Manual
H3C S7500 Series Command Manual
H3C S7500 Series Command Manual
H3C S7500 Series Command Manual
H3C S9500 Series Command Manual
H3C S9500 Series Command Manual
H3C S9500 Series Command Manual
H3C S9500 Series Command Manual
H3C S9500 Series Command Manual
H3C S9500 Series Command Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine