H3C S7500 Series Command Manual

Also see for S7500 Series: Operation manual Operation manual Operation manual Operation manual Command manual

H3C S7500 Series Command Manual Manual pdf 9 page image

Command Manual – PoEH3C S7500 Series Ethernet Switches Chapter 1 PoE Configuration Commands1-8DescriptionUse the poe enable command to enable the PoE feature on a port.Use the undo poe enable command to disable the PoE feature on a port.By default, the PoE feature on a port is enabled if the PoE feature is enabled on aboard.Examples# Enable the PoE feature on Ethernet 3/0/1. system-viewSystem View: return to User View with Ctrl+Z.[H3C] interface Ethernet3/0/1[H3C-Ethernet3/0/1] poe enable1.1.6 poe enable slotSyntaxpoe enable slot slot-numberundo poe enable slot slot-numberViewSystem viewParametersslot-number: Number of the slot where the board resides.DescriptionUse the poe enable slot command to enable the PoE feature on a board.Use the undo poe enable slot command to disable the PoE feature on a board.By default, the PoE feature is disabled on a board.Note:z Before enabling the PoE feature on a board, you must ensure that the remainingpower output is not less than the maximum power required for the board.Otherwise, PoE cannot be enabled on the board correctly.z After PoE is enabled on a PoE board, the rated power output shall be reserved forthe slot even when the board is removed from the slot. You need to release thispower output using the undo poe enable slot command.z If you insert a PoE-incapable board into the slot for which a rated power output isreserved, the reserved power output shall be released.z If you insert a PoE board of another type into the slot for which a rated poweroutput is reserved, the switch still applies the former PoE configuration to the port.

/ 25

Related manuals for H3C S7500 Series

H3C S7500 Series Command Manual

H3C S9500 Series Command Manual

This manual is suitable for:

S7500 Series

manualsdatabase

Your AI-powered manual search engine