H3C S7500 Series Command Manual

Also see for S7500 Series: Operation manual Operation manual Operation manual Operation manual Command manual

Contents

H3C S7500 Series Command Manual Manual pdf 2 page image

Command Manual – DLDPH3C S7500 Series Ethernet Switches Chapter 1 DLDP Configuration Commands1-1Chapter 1 DLDP Configuration Commands1.1 DLDP Configuration Commands1.1.1 display dldpSyntaxdisplay dldp [ interface-type interface-number ]ViewAny viewParametersinterface-type: Port type.interface-number: Port number.DescriptionUse the display dldp command to display the DLDP configuration information of thedevice or the specified port.Examples# Display the DLDP configuration information of the device. display dldpdldp interval 10dldp work-mode enhancedldp authentication-mode nonedldp unidirectional-shutdown manualdldp delaydown-timer 1The port number with DLDP is 2.interface GigabitEthernet2/0/1dldp port state : inactivedldp link state : downThe neighbor number of the port is 0.interface GigabitEthernet2/0/2dldp port state : advertisementdldp link state : upThe neighbor number of the port is 1.neighbor mac address : 000f-e227-750d

/ 9

Related manuals for H3C S7500 Series

H3C S7500 Series Command Manual

H3C S9500 Series Command Manual

This manual is suitable for:

S7500 Series

manualsdatabase

Your AI-powered manual search engine