H3C WX3000 Installation Manual

Also see for WX3000 Series: Configuration guide Getting started guide Getting started guide Compliance and Safety Manual Installation manual

Contents

H3C WX3000 Installation Manual Manual pdf 69 page image

5-12Figure 5-6 Sending the application file using XMODEMAfter download completion, the terminal displays the following information:Download successfully!19189956 bytes downloaded!Updating Basic BootWare? [Y/N]YUpdating Basic BootWare................Done!Updating Extend BootWare? [Y/N]YUpdating Extend BootWare..............Done!Change the baud rate from 115200 bps back to 9600 bps in HyperTerminal and reboot the device.z The file name, size and path shown in the figures are for reference only and may differ from theactualities on your device. Before updating the software of your device, check the currentBootWare version and application version to make sure that the correct file is used for the update.z After downloading files with a changed baud rate, timely change the baud rate back to 9,600 bps inHyperTerminal to ensure the normal display on the terminal screen when the system boots orreboots.Updating Applications Through a Serial ConnectionTo update an application file through a serial connection, you need to enter the serial submenu. Select2 from the BootWare main menu to enter the serial submenu. For details about this submenu, refer tosection Serial submenu on page 5-6.You can modify the serial interface baud rate to accelerate the file update. For details, refer to sectionModifying Serial Communication Parameters on page 5-8. Select 2 from the serial submenu. Thefollowing information appears: