HAI Omni LT Owner's Manual
Also see for OMNI LT: InstallationOwner's manual
                                                                      | |
Contents
| 
27Next, the display shows the A/D reading for the battery voltage, phone line voltage, AC power on, bell, and fuse:BAT: 225 PHONE: 140ACON: 82 BELL: 215 ↕FUSE: 222↕The next series of displays shows the current analog reading for each security zone input. The displays show the readings forzones 1-32.1= 46 2= 47 3= 464= 45 5= 46 6= 47 ↕THROUGH19= 47 20= 48 21= 4722= 46 23= 46 24= 47 ↑The normal loop reading for a zone is between 36 - 59 when the zone is secure. Each reading should be changing only by two orthree counts from its average steady reading. When a door or window is opened, the reading will go to a value that represents thatzone being open. If Zone 8 is a Supervised Fire Zone, the normal reading is between 26 ñ 43 when the zone is secure.This feature can be used to monitor the quality of the zone wiring and contacts. If the numbers begin to deviate from theiroriginal values when the system was new, wiring problems that will eventually lead to trouble or false alarms may be developing.You may wish to record the Status | Test values for future reference.5 = TEMP (TEMPERATURE)The Temperature Status menu allows you to view and scroll through the status of each Thermostat, PESM, and TemperatureSensor. To enter the Temperature menu, from the Status menu, press the 5 key on the console keypad. The system will display:TSTAT 1 TEMP:80 ↓HEAT:60 COOL:82You may enter a unit number to start displaying the status with that unit, or simply press the down arrow key to scroll through thelist of temperature zones. The status display is as shown under Temperature Control, except that now the arrow keys may be usedto continue scrolling.TSTAT 1MODE: AUTO FAN: AUTO ↕At this point, you may press the ' # ' key to control the temperature zone as specified under Temperature Control.6= ENERGY (ENERGY COST)The Energy Cost Status menu allows you to view the current energy rate in use.ENERGY COST: MIDThe Energy Cost will display Lo, Mid, Hi or Crit (for critical) energy rates.Event LogThe Event Log records the 50 most recent significant security system Events (happenings) and trouble conditions in the system.When a new event occurs, the oldest one is lost. |
Related manuals for HAI OMNI LT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine