HAI Omni LT Owner's Manual
Also see for OMNI LT: InstallationOwner's manual
                                                                      | |
Contents
| 
4When using the arrow keys to scroll through lists of units, zones, buttons, codes, and temperature zones, only the named items aredisplayed. If no text description has been given to an item, it will be skipped over when scrolling through that list. You can stillenter any item number to access it directly, and then scroll up and down among the named items. To look at another specificitem, simply enter the item number followed by the Down Arrow key.In some cases, the keypad keys (0-9, *, #) are assigned to different functions or menus. A key assignment is indicated by thecharacter key directly in front of the new function on the bottom line of the display. For example, if the bottom line says,"2=DELETE", you may press the 2 key to delete. From the top-level display, each key functions as a menu choice. Simply pressthe appropriate key and you will enter that menu.Main MenuThe main menu is entered from the top-level display by pressing the ' # ' key. This menu displays all of the functions that you canperform from the console. It is not necessary to display the main menu before selecting a function if the number for the desiredmenu item is known. The following menu choices are available:1=CONTROL 2=SECURITY3=BUTTON 4=ALL ↓5=TEMP 6=STATUS7=EVENTS 8=MESSAGE ↕9=SETUP↑Menu 1 - Selects Control functions for controlling lights and appliances.Menu 2 - Selects Security functions (arming, disarming, bypassing, and restoring).Menu 3 - Allows a Button (macro) to be activated.Menu 4 - Selects All Lights On / All Units Off commands and Leviton Scene Control commands.Menu 5 - Allows Temperature control for Thermostats and Energy Saver Modules.Menu 6 - Allows various status items to be displayed.Menu 7 - Allows you to view an event log of security "happenings".Menu 8 - Allows you to show, log, clear, say, phone, or send a message.Menu 9 - Allows you to enter setup mode for different operating configurations.Error BeepsIf you press a key that is invalid for the function that you are doing, the console will beep 3 times, indicating that it is not a validoption. Look at the bottom line of the display to see what keys you can press next.Trouble BeepsThe OmniLT constantly checks the entire system for proper operation. If trouble is found, the trouble is displayed on the bottomline and the console will beep at the rate of two beeps per second to alert you to the trouble. This feature can be turned off ifdesired - See Set Up Arming, Beep On Trouble.To silence the beeper, press the ' * ' key.For more information, see Trouble Indications. |
Related manuals for HAI OMNI LT
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine