26 For detailed definitions of technology terms, please visit our website atwww.hannspree.com/us (under the services section).2.2.7 Connecting USBConnect the USB flash drive to the TV using the USB port as shown. The JPEG andMP3 files are supported.2.3 Using the TV2.3.1 Turning the TV On and Off1 Press on the control panel or remote control. The power LED indicator onthe TV changes from red to green, indicating that the TV is on.2 Press again. The power LED changes from green to red, indicating thatthe TV is off .2.3.2 Switching Source SignalsPress INPUT on the control panel or remote control to select the incoming sourcesignal to set TV source for channel search. Press OK to confirm.2.3.3 Performing an Automatic Channel SearchBefore using the TV to view programs, you need to activate the channel search first.1 Press MENU on the control panel or remote control, then select to enter theTV menu.2 Select Tuner Mode to set the signal source to Antenna or Cable.Note:The USB HDD (Hard Disk Drive) is not supported.USBUSB Flash Drive(Optional)English