HANNspree ST32AMSB User Manual

30 For detailed definitions of technology terms, please visit our website atwww.hannspree.com/us (under the services section).3.1 OSD Setting MenusFollow the instructions indicated on the bottom of the OSD Function Menu. Press/ on the control panel or / arrow keys on the remote control to scrollthrough the menus. Press INPUT on the control panel or OK key on the remotecontrol to select an item and then press MENU key to exit the OSD menu.The following menus can be set by different adjustment methods.3.2 Adjusting Video Settings1 Press MENU to enter the OSD Main Menuscreen.2 Press / on the remote control toselect Video menu.3 Press / OK on the remote control toenter the Video menu.4 Press / on the remote control to select an item.5 Press / on the remote control to change the scales or press OK on the remotecontrol to enter an item.6 Press RETURN to return to the Video menu.7 Press MENU to exit the Video menu.The Video menu can be used to adjust the Multimedia, Picture Mode, Back Light,Brightness, Contrast, Saturation, HUE, Sharpness, Color Temperature,Advanced Video, and VGA (VGA mode only) settings. Back Light, Brightness,Contrast, Saturation, HUE, Sharpness, and Color Temperature are only availablefor adjustments if you select User in Picture Mode. Press / on the remotecontrol to adjust these settings.• Multimedia can be used to access image and audio files on a USB flash drive.• Picture Mode can be set to Cinema, Sport, Vivid, Game, or User.• Advanced Video can be used to set ANR, MPEG NR, Adaptive Luma Control,Flesh Tone, and Blue Stretch.• VGA can be used to set Auto Adjust, H.Position, V.Position, Phase, and Clock.Note:The items available on the OSD may vary depending on the input signal source.CH CHEnter Select ExitOK RETURNMultimediaPicture ModeBack LightBrightnessContrastSaturationHUESharpnessColor TemperatureAdvanced VideoVideo70507850010UserEnglish